Home inspection cost: fees, add-ons and what's included
Quick take
- A general home inspection on a single-family home typically ran $300 to $500 nationally in Fixr's January 2025 guide. Our closing cost calculator budgets $350 to $600 for 2026. Larger and older homes land at the top of the range or above it.
- The standard inspection leaves out radon, mold, wood-destroying insects, septic systems and wells. Each is a separate add-on, typically $125 to $1,000 depending on the test (Fixr, 2025).
- Our 2026 base estimate of $350 to $600 plus radon, sewer scope and a termite report adds up to roughly $825 to $2,350 using the add-on ranges below, with most of the spread coming from the sewer scope.
- Book the general inspection within days of going under contract. Your inspection deadline comes from your purchase contract, and specialist follow-ups take time.
The inspection is one of the few costs of buying that you choose, schedule and pay for yourself, often before closing rather than at it. Here is what you get for the fee, what you do not, and what the extras cost.
Plain-English definitions
General home inspection. A visual inspection of a home's readily accessible systems and components, done for you (not the lender) by an inspector you hire. It reports what is not working, unsafe or near the end of its life.
Standard of practice. The written scope an inspector follows, published by trade groups such as ASHI and InterNACHI and by some states.
Inspection contingency. A clause in your purchase contract that lets you inspect within a set number of days and then ask for repairs, renegotiate or cancel. The deadline and your remedies come from the contract, not from federal law, and they differ by state form.
WDI or WDO report. A wood-destroying insect (or organism) inspection, usually by a licensed pest control company. It looks for termites, carpenter ants, wood-boring beetles and the damage they leave.
Sewer scope. A camera run through the main sewer line from the house toward the street or septic tank, recorded on video.
pCi/L. Picocuries per liter, the unit for radon in air. EPA recommends fixing a home at 4 pCi/L or higher and says to consider fixing it between 2 and 4 pCi/L.
What a standard home inspection costs
Fixr's January 2025 cost guide puts the national range at $300 to $500, with an average of about $400. The same guide prices it at roughly $0.18 to $0.25 per square foot, which works out like this:
- 1,200 sq ft: $215 to $300
- 1,600 sq ft: $290 to $400
- 2,000 sq ft: $360 to $500
- 2,200 sq ft: $395 to $550
By home type, Fixr lists condos at $200 to $400, townhouses and single-family homes at $300 to $500, and multi-family buildings at $400 to $800. State ranges in the same guide run from about $275 at the low end (South Carolina) to $600 at the high end (New Jersey, Washington).
Those are 2025 figures. Our closing cost calculator uses a slightly higher $350 to $600 as its 2026 estimate, listed with its other ranges on the methodology page, so treat the Fixr numbers as last year's baseline and a local quote as the real price. Size, age, crawlspaces, detached structures and local labor costs all push the price up.
What the inspection covers
ASHI's Standard of Practice requires the inspector to look at the systems and components that are visible, readily accessible and installed. Its required sections are:
- Structural components
- Exterior
- Roofing
- Plumbing
- Electrical
- Heating
- Air conditioning
- Interiors
- Insulation and ventilation
- Fireplaces and fuel-burning appliances
Inspectors do not open walls or move furniture, so watch for "not inspected" or "limited by access" notes as closely as for defects.
What the inspection leaves out
ASHI's general exclusions (Section 13 of the current standard) say the inspector is not required to report on, among other things:
- Remaining life of systems and components
- Methods, materials and costs of corrections, so a report rarely prices a repair
- Code compliance, past or present
- The advisability of purchasing the property
- Mold, wood-destroying organisms and other life forms
- Environmental hazards, including radioactive substances such as radon
- Underground items, such as storage tanks
The plumbing section separately excludes wells and well pumps and septic and other sewage disposal systems. The underground sewer line is not named, but it is underground and out of view, which is why sewer scopes are sold separately.
Your inspector's agreement and state rules can widen or narrow this list, so read the agreement's exclusions before the appointment.
Add-ons and what they cost
The ranges below come from Fixr's January 2025 guide, so expect 2026 quotes at or above them. Bundling with your general inspector is often cheaper than booking each one separately.
- Radon test: $125 to $400 for a professional test. EPA recommends testing all homes, whatever the foundation or radon zone. EPA's real estate guidance accepts short-term tests of at least 48 hours, such as two passive tests side by side or a continuous monitor, with steps to detect tampering.
- Sewer scope: $200 to $1,000. The low end is a simple run from an accessible cleanout; the high end reflects long lines, no cleanout or a plumber's rate.
- Termite / WDI report: $150 to $350.
- Mold assessment: $450 to $800, more if lab sampling is added.
- Septic inspection: $150 to $300, more if the tank has to be pumped.
- Well inspection: $300 to $500.
What a finding costs is another matter. EPA's 2006 buyer and seller guide put radon mitigation at $800 to $2,500; that figure is two decades old, so treat it as context and get a current quote from a certified mitigator. This Old House's cost guide (updated March 2026) puts a sewer line replacement at $1,390 to $5,320 for most homeowners, an average of about $3,320, or $50 to $250 per linear foot depending on method. Long runs, deep lines and lines under a slab cost more. That gap between test price and repair price is the case for ordering a test where the house gives you a reason.
When your lender requires a test
Most lenders do not require a home inspection; they require an appraisal, which values the home for the loan. The CFPB notes the two are different and that you generally need both.
The common exception is wood-destroying insects on VA loans. VA's local requirements page (updated July 11, 2025) requires wood-destroying insect information statewide in 29 states plus DC and the territories, and only in certain counties of Colorado, Iowa, Nebraska, Nevada, New York, Pennsylvania, Utah and Wisconsin. In other states it is required only when the VA appraisal notes an issue. VA Circular 26-22-11 (June 2022) allows veterans to be charged the inspection fee where the Notice of Value requires it, and to pay for the required repairs.
Some loans also come with a well test or septic certification condition. Ask your loan officer early, since a lender-required test has to be done by someone the lender accepts.
Paying for it, and what you can do with the findings
Ask when the fee is due before you book. The CFPB warns that an inspector who is paid by someone else, or not paid until closing, may underemphasize problems. Paying the inspector yourself keeps them working for you.
What you can do with the report depends on your contract's contingency. The usual options are:
- Repair request. The seller fixes items before closing. Who picks the contractor, whether licensed trades are required, and what proof of the work you get (invoices, permits, warranties) depend on your agreement, so put those terms in writing and plan to check the work at your final walkthrough.
- Seller credit. The seller pays part of your closing costs. Loan programs cap these: Fannie Mae limits interested party contributions to 3% of the price or value (whichever is lower) when your loan-to-value is over 90%, 6% at 75.01% to 90%, and 9% at 75% or less, and the credit cannot fund your down payment or exceed your actual closing costs. VA caps seller concessions at 4% of reasonable value but does not limit credits for normal closing costs. FHA caps interested party contributions at 6% of the sales price, also limited to eligible costs (HUD Handbook 4000.1); confirm how your lender applies it. A credit generally cannot be paid to you as a repair reimbursement; it covers closing costs, which frees your own cash for the repair. Ask your lender how it treats a credit negotiated over inspection findings.
- Price reduction. Lowers the price and the loan amount, but saves less cash at closing than a credit of the same size.
- Cancel. If the contingency allows it and you act before the deadline.
Red flags to watch for
- "Not inspected" on a major system, such as the roof, attic or crawlspace, with no plan to get access.
- "Recommend evaluation by a licensed..." a structural engineer, electrician, plumber or roofer. The inspector is flagging a risk they are not scoped to size; the specialist visit has to fit inside your deadline.
- An inspector recommended and paid through the seller's side, or one who will not take payment until closing.
- A home with no radon result, in any state. EPA's buyer and seller guide recommends testing before a sale, and a test after closing gives you no leverage.
- Mature trees near the sewer line, or an older home, with no sewer scope.
- A contingency period shorter than the time it takes to book a specialist.
How to book and budget your inspections
- Find your contingency deadline. Read the inspection contingency in your purchase contract and note the date it ends. Everything below has to fit inside it.
- Book the general inspection first. Schedule it within a few days of going under contract, and ask for a written quote that states square footage, age and any surcharges.
- Choose add-ons from the house, not a package. Radon for every home, since EPA recommends testing all homes regardless of foundation, sewer scope for older homes or mature trees, WDI where your lender or VA requires it, septic and well where the home has them.
- Ask your lender what it requires. Ask whether your loan needs a wood-destroying insect report, a well test or a septic certification, and who can perform it.
- Read the report the day it arrives. Sort findings into safety issues, expensive systems and minor items, and book any specialist evaluation the inspector recommends right away.
- Send your request before the deadline. Ask for repairs, a credit or a price reduction in writing, with quotes attached, before the contingency period ends.
Scenario: what this looks like in practice
Consider a buyer under contract on a $400,000, 1,900-square-foot house built in 1962, with a 10-day inspection contingency and a conventional loan at 20% down. They book a general inspection ($475), a radon test ($175), a sewer scope ($250) and a termite report ($150). Total: $1,050, paid at the appointments.
The radon result comes back at 2.1 pCi/L. That is below EPA's 4 pCi/L action level but inside the 2 to 4 range where EPA says to consider mitigation, so the buyer plans a follow-up test after moving in. The sewer scope shows root intrusion and an offset joint about 30 feet from the house. A plumber the buyer calls quotes $4,500 to dig up and replace that section, within the replacement range above. The buyer asks the seller for a $4,500 credit toward closing costs, with the plumber's quote and the video attached, on day 8.
At 80% loan-to-value, Fannie Mae's cap is 6% of the lower of the price or appraised value. Assuming the home appraises at $400,000 or more, that is $24,000, so the credit fits. The seller agrees to $3,500. Assuming the buyer has at least $3,500 in eligible closing costs (typical on a $320,000 loan), the credit covers that much of their closing bill, which frees $3,500 of their own cash for the repair. The plumber is still paid $4,500 by the buyer, not the seller.
Compare repair costs alone: the buyer's net cost is $1,000, against $4,500 had they found the roots after closing. Counting everything, the buyer spends $1,050 on inspections plus $1,000 on the repair, $2,050, against $4,500 for a buyer who skipped the inspections and paid for the repair in full. Had the inspection period ended before the scope was booked, the credit would not have been on the table.
Questions to ask
- To the inspector: "What is your total fee for this address, including any charge for age, crawlspace or detached structures, and what does your agreement exclude?"
- To the inspector: "Which add-ons would you order on this specific house, and why?"
- To your lender: "Does my loan require a wood-destroying insect report, well test or septic certification, and is there a limit on seller credits, including credits tied to repairs?"
- To your agent: "What date does my inspection contingency end, and what does the contract let me do if a specialist can't come out before then?"
To see how an inspection fits with the rest of what you pay at closing, run your numbers in the closing cost calculator or look up your county's page from the county index.
Sources
- ASHI Home Inspection Standard of Practice
- Fixr: Home Inspection Cost (updated January 2025)
- CFPB: Schedule a home inspection
- EPA: Home Buyer's and Seller's Guide to Radon
- VA Home Loans: Local Requirements (wood-destroying insect information)
- EPA: What is EPA's action level for radon and what does it mean?
- EPA: Map of Radon Zones and supplemental information
- This Old House: Sewer Line Replacement Cost (updated March 2026)
- HUD Handbook 4000.1: FHA Single Family Housing Policy (interested party contributions)
- Fannie Mae Selling Guide B3-4.1-02: Interested Party Contributions